橡胶技术网

合成橡胶工业
CHINA SYNTHETIC RUBBER INDUSTRY
2009 Vol.32 No.4 P.288-292

 橡胶技术网

顺酐化苯乙烯-丁二烯-苯乙烯嵌段共聚物离聚体的制备及其结构和性能

刘大刚　 谢洪泉　

摘　要：在甲苯/环己烷混合溶剂体系中考察了顺酐化苯乙烯-丁二烯-苯乙烯嵌段共聚物(SBS)的制备条件,得到马来酸酐/SBS/过氧化苯甲酰质量比为30/100/1、SBS质量浓度为0.10 g/mL、过氧化苯甲酰/甲苯引发液的滴加时间为10 min及75 ℃下反应4 h的较为理想的反应条件.在此条件下既可以避免凝胶的生成,又可获得较高的接枝率(6.87%).所得顺酐化SBS经氢氧化钠溶液中和后生成钠离聚体,傅里叶变换红外光谱分析证实接枝反应和离聚体的合成均得到预期的产物.差示扫描量热分析结果表明离子化微区的存在使得离聚体在高温段有1个玻璃化转变温度.离聚体的拉伸强度、搭接剪切强度和乳化性能均随顺酐化程度的提高而改善.
关键词：苯乙烯-丁二烯-苯乙烯嵌段共聚物;顺酐化;离聚体;力学性能;搭接剪切强度
分类号：TQ334.3 　文献标识码：A
文章编号：1000-1255(2009)04-0288-05

Preparation, structure and properties of ionomers of maleated styrene-butadiene-styrene block copolymers

Liu Dagang（College of Forestry,South China Agricultural University,Guangzhou 510642,China）　 Xie Hongquan（College of Chemistry,Huazhong University of Science and Technology,Wuhan 430074,China）　

Abstract：In mix-solvent of cyclohexane/toluene, maleic anhydride (MAH) was grafted onto styrene-butadiene-styrene block copolymer (SBS). The results showed that MAH/SBS/benzoyl peroxide(BPO) (mass ratio) 30/100/1, concentration of SBS 10 g/mL, droping time of BPO/toluene 10 min, temperature 75 ℃, and reaction time 4 h were the optimum conditions for maleation. High grafting degree (6.87%) was obtained without gelation. Sodium ionomer was synthesized from ionization of maleated SBS, which was proved by Fourier transform infrared spectroscopy. Results from differential scanning calorimetry showed that ionic microdomains were formed in the ionomer, as it was confirmed to have a glass transition at high temperature. Maleation degree or grafting degree was an important factor for mechanical properties, bonding strength and emulsion volume. Tensile strength and lap shear strength increased with increasing of grafting degree due to great improvement of polarity. Sodium ionomer of SBS was proposed to be used as an adhesive for polar matrixes or compatibilizer for polymer blends.
Keywords：styrene-butadiene-styrene block copolymer; maleation; ionomer; mechanical property; lap shear strength

基金项目：中国石化巴陵石化公司资助项目.
作者简介：刘大刚(1978-),男,博士,讲师.已发表论文14篇.
作者单位：刘大刚（华南农业大学,林学院,广东,广州,510642）　
　　　　　谢洪泉（华中科技大学,化学系,湖北,武汉,430074）　

参考文献：

[1]Mrrov Z,Velichkova R.Modification of styrene-isoprene block copolymer(Ⅲ):Addition of maleic anhydride:Mechanism[J].Eur Polym J,1993,29(4):597-601.
[2]Zhang Aimin,Li Chao.Chemical initiation mechanism of maleic anhydride grafted onto styrene-butadiene-styrene block copolymer[J].Eur Polym J,2003,39(6):1291-1295.
[3]Rosales C,Perera R,Ichazo M,et al.Grafting of polyethylenes by reactive extrusion(Ⅰ):Influence on the molecular structure[J].J Appl Poly Sci,1998,70(1):161-176.
[4]Machado A V,van Duin M,Covas J A.Monitoring polyolefin modification along the axis of a twin-screw extruder(Ⅱ):Maleic anhydride grafting[J].J Polym Sci(part A):Polym Chem,2000,38(21):3919-3922.
[5]敖枝平,谢洪泉.磺化SBR离子聚合体的熔融行为及力学性能[J].合成橡胶工业,1992,15(3):146-150.
[6]Xie Hongquan,Xu Jigeng.Melt flow and mechanical properties of sulfonated butyl rubber ionomers[J].Die Angew Makromol Chem,1990,174(1):177-181.
[7]刘大刚,谢洪泉.羧酸型离聚体的研究进展[J].合成橡胶工业,2004,27(1):56-59.
[8]刘大刚,谢洪泉,叶强.磺化SBS离聚体与结晶聚烯烃的共混物[J].合成橡胶工业,2005,28(6):472.
[9]Xie Hongquan,Liu Dagang,Xie Dong.Preparation,characterization,and some properties of ionomers from a sulfonated styrene-butadiene-styrene block copolymer without gelation[J].J Appl Polym Sci,2005,96(4):1398-1404.
[10]Xie Hongquan,Liu Dagang,Xie Dong,et al.Behavior of ionomers of sulfonated styrene-butadiene-styrene triblock copolymer in polymer blends with crystalline polyolefins and as compatibilizer[J].J Appl Polym Sci,2006,99(4):1887-1894.

收稿日期：2008年6月2日

修稿日期：2009年4月25日

出版日期：2009年7月15日

请看PDF全文