作者简介：丛晓民(1972-),男,辽宁沈阳人,清华大学助理研究员,博士后,主要从事固体废弃物资源化回收利用方面的研究.
作者单位：丛晓民（清华大学,先进材料重点实验室,北京,100084）
冯涛（清华大学,先进材料重点实验室,北京,100084;中国矿业大学(北京校区),化学与环境工程学院,北京,100083）
盖国胜（清华大学,先进材料重点实验室,北京,100084）
解强（中国矿业大学(北京校区),化学与环境工程学院,北京,100083）
参考文献：
[1]袁立.橡胶的回收利用[J].世界橡胶工业,1998,25(1):29-36.
[2]Jang Ji-won,Yoo Taek-soo,Oh Jae-hyum,et al.Discarded tire recycling practices in the United States,Japan and Korea resources[J].Conservation and Recycling,1998,22(1-2):1-14.
[3]Adhikari B,De D,Maiti S.Reclamation and recycling of waste rubber[J].Prog.Polym.Sci.,2000,25(7):909-948.
[4]Samolada M C,Balauf W.Production of a bio-gasoline by upgrading biomass flash pyrolysis liquids via hydrogen processing and catalytic cracking[J].Fuel,1998,77(14):1667-1675.
[5]Yang J,Kaliaguine S.Improved quantitative determination of elastomers in tires rubber by kinetic simulation of DTG curves[J].Rubber Chemistry and Technology,1993,66(2):213-229.
[6]Harrison G,Ross A B.use of tyre pyrolysis oil for solvent augmentation in two-stage coal liquefaction[J].Fuel,1996,75(8):1009-1013.
[7]Darmstadt H,Chaala A.SIMS and ESCA characteration of bitumen reinforced with pyrolytic carbon black[J].Fuel,1996,75(2):125-132.
[8]Benallal B,Roy C,Pakdel H.et al.Characterization of Pyrolytic light naphtha from vacuum pyrolysis of used tyres comparison with petroleum naphtha[J].Fuel,1995,74(11):1589-1594.
[9]Roy C,Chaala A.Darmstadt H.et al.The vacuum pyrolysis of used tires end-uses for oil and carbon black products[J].Journal of Analytical and Applied Pyrolysis,1999,51(1-2):201-221.
[10]Mastral A M,Murillo R,Callén M S,et al.Evidence of coal and tire interaction in coal-tire coprocessing for short residence times[J].Fuel Processing Technology,2001,69(2):127-140.
[11]Mastral A M,Murillo R,Callén M S,et al.Application of coal conversion technology to tire processing[J].Fuel Processing Technology,1999,60(3):231-242.
[12]Christopher S,Avenell C,Lgnacio S D,et al.Solid waste pyrolysis in a pilot-scale batch pyrolyser[J].Fuel.1996,75(10):1167-1174.
[13]Wey Ming-yen,Huang Shiann-chin,Shi Cheng-lie.Oxidative pyrolysis of mixed solid wastes by sand bed and freeboard reaction in a fluidized bed[J].Fuel,1997,76(2):115-121.
[14]Wey Ming-yen,Liou Ben-horng.The autothermal pyrolysis of waste tires[J].Journal of Air & Waste Management Association,1995,45(11):855-863.
[15]Lee Jong-ming,Lee Jung-soo.Pyrolysis of waste tires with partial oxidation in a fluidized-bed reactor[J].Energy,1995,20(10):969-976.
[16]Anderson L L,Callen M.Hydrocoprocessing of scrap automotive tires and coal:Analysis of oils from autoclave coprocessing[J].Ind.Eng.Chem.Res.,1997,36(11):4763-4767.
[17]Mastral A M,Albarez R.Characterization of chars from coal-tire copyrolysis[J].Ind.Eng.Chem.Res.,1999,38(7):2856-2860.
[18]Ana M,Mastral M,Mayoral C,et al.Evaluation of synergy in tire rubber-coal coprocessing[J].Ind.Eng.Chem.Res.,1998,37(9):3545-3550.
[19]Gupta A K.Thermal destruction of solid wastes[J].Journal of Energy Resources Technology,1996,118(3):187-192.
[20]Roy C.Pilot plant demonstration of used tires vacuum pyrolysis[A].Pyrolysis and Gasification[C].London:Elsevier Science Publ.Co.Inc.,1989:180-189.
[21]Cypres R,Bettens B.Production of benzoles and active carbon from waste rubber and plastic materials by means of pyrolysis with simultaneous post-cracking[A].Pyrolysis and Gasification[C].London:Elsevier Science Publ.Co.Inc.,1989:209-216.
[22]Karminsky W,Sinn H.Pyrolysis of plastic waste and scrap tires using a fluidized bed process[A].ACS symposium series 130[C].Washington:American Chemical Society,1980:68-77.
[23]Black J W.Brown D B.CAR technology[J].Castle Capital Inc.Newsletter,1991,55(5):203-210.
[24]范仁德.废橡胶的综合利用技术[M].北京:化学工业出版社,1989.
[25]Fortuna F,Cornacchia G,Mincarini M,et al.Pilot-scale experimental pyrolysis plant:mechanical and operational aspects[J].Journal of Analytical and Applied Pyrolysis,1997,40/41(1/2):403-417.
[26]Harrison G,Ross A B.Use of tyre pyrolysis oil for solvent augmentation in two-stage coal liquefaction[J].Fuel,1996,75(8):1009-1013.
[27]Karminsky W,Mennerich D.Pyrolysis of synthetic tire rubber in a fluidized-bed reactor to yield 1,3-butadiene,styrene and carbon black[J].Journal of Analytical and Applied Pyrolysis,2001,58/59(3):5803-811.
[28]Helleur R,Popovic N,Ikura M.Characterization and potential applications of pyrolytic char from ablative pyrolysis of used tires[J].Journal of Analytical and Applied Pyrolysis,2001,58/59(1/2):813-824.
[29]Williams P T,Bottrill R P,Cunliffe A M.Combustion of tyre pyrolysis oil[J].Transactions of the Institution of Chemical Engineers,1998,76(4)1291-301.
[30]黄发荣,陈涛,沈学宁.高分子材料的循环利用[M].北京:化学工业出版社,2000.
[31]金余其,严建华,顾介元,等.废轮胎流化床热解半焦结构特性[J].环境科学,2005,25(6):159-162.
[32]王琼,严建华,池涌,等.废轮胎热解炭的分析及其活化特性的研究[J].燃料化学学报,2004,32(3),301-306.
[33]张志霄,池涌,闫大海,等.废轮胎回转窑中试热解产物特性[J].浙江大学学报(工学版),2005,39(5):715-721.
[34]闫大海,严建华,池涌.等.废轮胎回转窑中试热解炭表面组分XPS分析[J].燃料化学学报,2005,33(4):487-491.
[35]严建华,闫大海.池涌.等.废轮胎回转窑中试热解炭中碳元素化学形态[J].化工学报,2006,57(1):109-114.
[36]王文选,仲兆平,陈晓平,等.废轮胎热裂解技术[J].燃烧科学与技术,1999,5(3):331-336.
[37]戴先文,赵增立,吴创之,等.循环流化床内废轮胎的热解油化[J].燃料化学学报,2000,28(1):71-75.
[38]Dai X W,Yin X L.Pyrolysis of waste tires in a circulating fluidized-bed reactor[J].Energy,2001,26(3):385-399.
[39]崔洪,杨建丽,刘振宇.废旧轮胎热解行为的TG/DTA研究[J].化工学报,1999,50(6):826-828.
[40]肖国良,彭小芹,盖国胜,等.深加工对废轮胎裂解炭黑表面性能的影响[J].材料科学与工程学报,2004,22(2):276-279.
[41]彭小芹,肖国良,方修春,等.废轮胎裂解炭黑的深加工及应用研究[J].合成材料老化与应用,2004,33(3):21-24.
[42]肖国良,彭小芹,盖国胜.废轮胎裂解炭黑的超细粉碎和表面改性及在NR中的应用[J].橡胶工业,2004,51(2):78-82.
[43]孙玉海,盖国胜,张培新.我国废橡胶资源化利用的现状和发展趋势[J].橡胶工业,2003,50(12):760-763.
[44]Williams P T,Besler S,Taylor D T.Batch pyrolysis of tyre waste-fuel properties of the derived pyrolytic oil and overall plant economics[J].Journal of Power and Energy,1993,207(1):55-63.
