橡胶技术网

弹性体
CHINA ELASTOMERICS
2001 Vol.11 No.6 P.1-8

橡胶技术网

ABS树脂的性能与形态结构设计

Ⅰ SAN在PB橡胶粒子上接枝率的控制及其对ABS树脂结构和性能的影响

Property and morphological design of ABS resins

Ⅰ The control of the degree of grafting SAN copolymer onto PB rubber particles and its effect on morphology and property of ABS resins.

张明耀  徐新峰  杨海东  张会轩  索延辉  沙中瑛 

摘 要:采用种子乳液聚合技术在聚丁二烯乳胶粒上接枝共聚苯乙烯和丙烯腈,通过改变共聚单体和聚丁二烯的投料比合成了一系列PB-g-SAN共聚物,将这些共聚物与SAN树脂进行熔融共混制得了ABS树脂.研究了投料比对SAN在PB上的接枝率、SAN的分子量和ABS树脂的形态结构及性能的影响.结果发现,随着投料比的增加,SAN在PB上的接枝率及SAN的分子量提高,接枝率和SAN分子量共同作用影响着ABS树脂的冲击韧性和加工性能.形态结构研究结果表明,投料比不仅影响着橡胶粒子在SAN基体中的分散程度,而且影响着橡胶粒子的内部结构,随着投料比的增加,橡胶粒子在基体中的分散程度提高,其内部的包容结构增多并导致了橡胶粒子粒径的增大.
关键词:ABS树脂;性能;形态结构;接枝率;投料比
分类号:TQ 325.2 文献标识码:A

文章编号:1005-3174(2001)06-0001-08

基金项目:国家科委九五重点攻关项目(96-A08-02-05);吉林省科技发展计划项目(19990106)
作者简介:张明耀(1972-),男,吉林桦甸人,讲师,博士研究生.主要从事乳液聚合和高聚物共混改性方面的研究工作,已发表论文15篇.
作者单位:张明耀(吉林工学院,吉林,长春,130012) 
     徐新峰(吉林工学院,吉林,长春,130012) 
     杨海东(吉林工学院,吉林,长春,130012) 
     张会轩(吉林工学院,吉林,长春,130012) 
     索延辉(吉林化学工业公司合成树脂厂,吉林,吉林,132021) 
     沙中瑛(吉林化学工业公司合成树脂厂,吉林,吉林,132021) 

参考文献:

[1]Donald A.M,Kramer E.J.Plastic deformation mechanisms in ploy (aerylonitrile-styrene)[ABS][J].J.Mater.Sci.,1982,17:1 765.
[2]Celina R.B.,Patricia M.F.,Miguel S.,et al.Microstructure,deformation,and fracture behavior of commercial ABS resins [J].J.Appl.Polym.Sci.,1997,58:1.
[3]Turley S.G.,Keskkula H.Effect of rubber phase volume fraction in impact polystyrene on mechanical behavior[J].Polymer.,1980,21:466.
[4]Beahan P.,Thomas A.,Bevis M..Some observations on the micromorphology of deformed ABS and HIPS rubber-modified materials[J].J.Mater.Sci.,1976,11:1 207.
[5]Piorkowska E.,Argon A.S.,Cohen R.E.Izod impact strength of polystyrene-based blends containing low molecular weight polybutadiene[J].Polymer.,1993,34:4 435.
[6]Daniels E.S.,Dimonie V.L.,El-Aasser M.S..Preparation of ABS latexes using hydroperoxide redox initiators [J].J.Appl.Polym.Sci.,1990,41:2 463.
[7]Ricco T.,Pavan A.,Danusso F..Dynamic transition of grafted polybutadiene in ABS resins [J].Polymer.,1975,16:685.
[8]Rink M.,Ricco T.,Lubert W.,et al.Force-displacement evaluation of macromolecular materials inflexural impact test.(Ⅱ)Influnce of rubber content,degree of grafting,and temperature on the impact behavior of ABS resins [J].J.Appl.Polym.Sci.,1978,22:429.
[9]Aoki Y.J..Dynamic viscoelastic properties of ABS polymers in the molten state 5.Effect of grafting degree[J].Macromolecules.,1987,20:2 208.
[10]kim H.,Keskkula H.,Paul D.R..Toughening of SAN copolymers by an SAN emulsion grafted rubber[J].Polymer.,1990,31:869.
[11]Kim H.,Keskkula H.,Paul D.R..Effect of acrylonitrile content on the toughness of ABS materials [J].Polymer.,1991,32:1 447.
[12]Kim H.,Keskkula H.,Paul D.R..The role of inherent ductility in rubber toughening of brittle polymers[J].Polymer.,1991,32:2 372.
[13]Keskkula H.,Kim H.,Paul D.R..Impact modification of styrene-acrylonitrile copolymers by methyl methacrylate grafted rubbers[J].Polym.Eng.Sci.,1990,30:1 373.
[14]Brydon A.,Burnett G.M.,Cameron G,G..Free-radical grafted of monomers to polydienes (Ⅰ)Effect of reaction condition on grafting of styrene to polybutadiene[J].J.Polym.Sci.,1973,11:3 255.
[15]Brydon A.,Burnett G.M.,Cameron G,G..Free-radical grafting of monomers to polydienes (Ⅱ)Kinetics and mechanism of styrene grafting to polybutadiene [J].J.Polym.Sci.,1974,12:1 011.

收稿日期:2001年5月10日

修稿日期:2001年7月25日

出版日期:2001年12月25日

请看PDF全文