基金项目：中国石油炼油与化工分公司重点攻关项目(0704D01-01);吉林石化公司博士后基金项目.
作者简介：金范龙(1963-),男,朝鲜族,吉林图们人,教授,博士,主要从事聚合物合成与改性方面的研究工作.
作者单位：金范龙（中国石油吉林石化公司研究院,吉林,吉林,132021;吉林化工学院化工与材料工程学院,吉林,吉林,132022）
陆书来（中国石油吉林石化公司,研究院,吉林,吉林,132021）
张溯燕（中国石油吉林石化公司,电子商务部,吉林,吉林,132022）
蔡小平（中国石油吉林石化公司,研究院,吉林,吉林,132021）
于京鑫（华东理工大学,材料科学与工程学院,上海,200237）
参考文献：
[1]Kim B K,Shin G S.Melt blends of SAN with SAN-graft-polybutadiene[J].Journal of Applied Polymer Science,1993,48(6):945～951.
[2]Kim H,Keskkula H,Paul D R.Toughening of SAN copolymers by an SAN emulsion grafted rubber[J].Polymer,1990,31(5):869～876.
[3]Giaconi G F,Castellani L,Maestrini C,et al.Development of toughness in ABS resins[J].Polymer,1998,39(25):6315～6324.
[4]Xu X F,Wang R,Tan Z Y,et al.Effects of polybutadiene-g-SAN impact modifiers on the morphology and mechanical behaviors of ABS blends[J].European Polymer Journal,2005,41(8):1919～1926.
[5]Zhang N,Bao X X,Tan Z Y,et al.Morphology and mechanical properties of ABS blends prepared from emulsion-polymerized PB-g-SAN impact modifier with AIBN as initiator[J].Journal of Applied Polymer Science,2007,105(3):1237～1243.
[6]Choi J H,Ryu J H,Kim S Y.Storage modulus of polybutadiene core in acrylonitrile-butadiene-styrene polymers with different degrees of grafting[J].Journal of Applied Polymer Science,2001,81(4):924～930.
[7]Dear J P,Graham J C,Brown P.Comparison of the toughness of different acrylonitrile-butadiene-styrene copolymers[J].Polymer,1998,39(11):2349～2354.
[8]Arostegui A,Sarrionandia M,Aurrekoetxea J,et al.Effect of dissolution-based recycling on the degradation and the mechanical properties of acrylonitrile-butadiene-styrene copolymer[J].Polymer Degradation and Stability,2006,91(11):2768～2774.
[9]Chang M C O,Nemeth R L.Rubber particle agglomeration phenomena in acrylonitrile-butadiene-styrene (ABS) polymers.I.Structure-property relationships study on rubber particle agglomeration and molded surface appearance[J].Journal of Applied Polymer Science,1996,61(6):1003～1010.
[10]Kudo T,Hashizume Y,Itoh M,et al.Impact-resistant resin composition[P].USP:3954903,1976-05-04.
[11]Jin F L,Lu S L,Song Z B,et al.Effect of rubber contents on brittle-tough transition in acrylonitrile-butadiene-styrene blends[J].Materials Science and Engineering A,2010,527(15):3438～3441.
|
