基金项目：广东省部产学研合作重大专项( 2009A090100005)
作者简介：吕智超(1986),男,辽宁大连人,上海交通大学在读硕士研究生,主要从事胶粉和胶粉基热塑性弹性体的研究工作.
作者单位：吕智超（上海交通大学高分子材料研究所,上海,200240）
王仕峰（上海交通大学高分子材料研究所,上海,200240）
张勇（上海交通大学高分子材料研究所,上海,200240）
张隐西（上海交通大学高分子材料研究所,上海,200240）
参考文献：
[1]G 霍尔登.热塑性弹性体[M].北京:化学工业出版社,2000.
[2]程时捷.废橡胶的回收利用[J].橡胶工业,1996,43(5):307～308.
[3]邱清华,贾德民.废胶粉利用研究进展[J].橡胶工业,1997,44(1):691～951.
[4]叶春葆.废胶粉的制造及其用途[J].化工科技市场,2000,6(3):15～18.
[5]何永峰,刘玉强.胶粉生产及应用-废旧橡胶资源化新技术[M].北京:中国石化出版社,2001.
[6]卢永源,席涛,文静,等.废胶粉/HDPE共混型热塑性弹性体的力学性能[J].热带农业科学,2008,28(3):19～22.
[7]王星义,王星,罗玲,等.废胶粉/HDPE热塑性弹性体的制备研究[J].塑料工业,2008,36(8):20～22.
[8]J I Kim,S H Ryu,Y W Chang.Mechanical and dynamic mechanical properties of waste rubber powder/HDPE composite[J].J Appl Polym Sci,2000,77(12):2595～2602.
[9]Luiz C.Thermoplastic rubber obtaintion method[P].USP:5359007,1994-10-25.
[10]黄祖长.含废丁腈硫化胶粉的NBR/SAN热塑性弹性体共混物的热流变性能[J].橡胶参考资料,2005,35(4):9～15.
[11]陈占勋,孙正奎,许淑贞.共混型热塑性弹性体的研究-硫化胶粉/聚乙烯共混体的动态硫化[J].青岛化工学院学报,1989,10(3):53～56.
[12]王星,王星义,罗玲,等.线形低密度聚乙烯/废胶粉热塑弹性体动态硫化性能研究[J].化学研究与应用,2008,20(3):281～285.
[13]陈占勋,李小宝,杨淑欣,等.共混型热塑性弹性体的研究-废胶粉聚乙烯热塑性弹性体的制备及其性能[J].合成橡胶工业,1989,12(3):189～192.
[14]王炼石.塑料/橡胶共混物的相结构与增韧作用[J].塑料助剂,2005,53(5):45～49.
[15]瓮子良,冯予星,伍社毛,等.废胶粉/高密度聚乙烯热塑性弹性体的结构与性能[J].特种橡胶制品,2006,27(5):5～9.
[16]祁运凤.胶粉/塑料热塑性弹性体研究[D].昆明:昆明理工大学,2002.
[17]S Anandhan,P P De,Anil K Bhowmick,et al.Thermoplastic elastomeric blend of nitrile rubber and poly(styrene-co-acrylonitrile).II.Replacement of nitrile rubber by its vulcanizate powder[J].J Appl Polym Sci,2003,90(9):2348～2357.
[18]李岩,张勇,张隐西.废橡胶胶粉/ HDPE/POE热塑性弹性体的动态硫化[J].高分子材料科学与工程,2004,20(6):187～190.
[19]王雄刚,曾宪通,赵建青,等.回收高密度聚乙烯/废胶粉共混体系的力学性能研究[J].塑料工业,2006,34(7):8～10.
[20]瓮子良,冯予星,伍社毛,等.废胶粉/高密度聚乙烯共混物的界面相容性[J].合成橡胶工业,2007,30(1):39～42.
[21]Oliphant K,Baker W E.The use of cryogenically ground rubber tires as a filler in polyethylene blends[J].Polym Eng Sci,1993,3(3):66～69.
[22]Johson,Lane D.Thermoplastic compositions containing ground vulcanized rubber and polyolefin resin[P].USP:5157082,1992-10-20.
[23]鄢志兵,张宁,张遂发,等.反应增容聚丙烯/废胶粉共混物的研究[J].现代塑料加工应用,2009,21(3):19～22.
[24]Amit K Naskar,Anil K Bhowmick,S K De.Melt-processable rubber:chlorinated waste tire rubber-filled polyvinyl chloride[J].J Appl Polym Sci,2002,84(3):622～631.
[25]Anandhan S,Rajeev R S,De S K,et al.Thermal degradation and swelling of thermoplastic vulcanizates from NBR/SAN and NBR/Scrap computer plastics blends[J].Kautschuk Gummi Kunststoffe,2009,62(10):529～536.
[26]P Nevatia,T S Banerjee,B Anil K Bhowmick.Thermoplastic elastomers from reclaimed rubber and waste plastics[J].J Appl Polym Sci,2002,83(9):2035～2042.
[27]牛晓伟.废胶粉的微波活化及其应用研究[D].扬州:扬州大学,2006.
[28]Amit K Naskar,Anil K Bhowmick,S K De.Thermoplastic elastomeric composition based on ground rubber tire[J].Polymer Engineering and Science,2001,41(6):1087～1098.
[29]J K Kim.Fracture behavior of crumb rubber filled elastomers[J].J Appl Polym Sci,1999,74(13):3137～3144.
[30]J K Kim,S H Lee.New technology of crumb compounding for recycling of waste tires[J].J Appl Polym Sci,2000,78(8):1573～1577.
[31]蒋涛,邹国享,程时远.胶粉的活化改性及其在弹性体中的应用研究进展[J].弹性体,2003,13(2):47～51.
[32]Abdel-Bary,E M Dessouki,A M El-Nesr,et al.Radiation-induced graft copolymerization of some vinyl monomers onto waste rubber powder[J].Polymer-Plastics Technology and Engineering,1997,36(2):241～256.
[33]Guo Baochun,Cao Van,Jia Demin,et al.Thermoplastic elastomers derived from scrap rubber powder/LLDPE blend with LLDPE-graft-(epoxidized natural rubber) dual compatibilizer[J].Macromolecular Materials and Engineering,2004,289(4):360～367.
[34]Peng Jing,Xia Haibing,Zhai Maolin,et al.Radiation-induced graft polymerization of maleic acid and maleic anhydride onto ultra-fine powdered styrene-butadiene rubber (UF SBR)[J].Radiation Physics and Chemistry,2007,76(11～12):1741～1745.
[35]Cavalieri F,Padella F,Cataldo F.Mechanochemical surface activation of ground tire rubber by solid-state devulcanization and grafting[J].J Appl Polym Sci,2003,90(6):1631～1638.
|
