作者简介：朱永刚(1968-),男,在读硕士,工程师,从事轮胎路面摩擦研究.
作者单位：朱永刚（合肥工业大学机汽学院,合肥,230009）
刘焜（合肥工业大学机汽学院,合肥,230009）
参考文献：
[1]Blan PJ.The significance and use of the friction coeficent[J].Tribology Int'1,2001,11(30):585-591.
[2]Moore D F 著,黄文治,等译.摩擦学原理和应用[M].北京:机械工业出版社,1982.
[3]彭旭东,郭孔辉,等.橡胶和轮胎的摩擦[J].橡胶工业,2003,50:562-568.
[4]Savkoor A R.Mechanics of sliding friction of elastomer[J].Wear,1986,113:37-60.
[5]Taber D.Advances in Polymer Friction[M].NewYork:Pergammon Press,1972.
[6]G Palasantzas.Influence of self-affine roughness on the adhesive oh the adhesive frivtion coefficient of a rubber body sliding on a solid subtrate[J].Surface Scaling,2004,565:191-196.
[7]Pual Meakin.Fractals,Scaling,and Growth Far from Equilibrium[M].Cambridge Cambridge University Press,1998,75-100.
[8]铁木辛柯.古地尔著,徐芝伦译.弹性力学[M].北京:高等教育出版社,1990.
[9]芥川惠造著,王秀霞译.轮胎的摩擦与粘弹性[J].轮胎工业,1998,18:269-274.
[10]B N J Persson,U Tartaglino,O Albohr,E Tosatti.Sealing is at the origin of rubber slippingon wet roads[J].Natrue Materials,2004,12(3):882-885.
[11]G Carbone,L Mangialardi.Adhesion and firction of an elastic half-space in contact with a slightly wavy rigid sruface[J].Journal of the Mechanics and Physics of Solids,2004,53:1267-1287.
[12]K L Johnson 著,徐秉业等译.接触力学[M].北京.高等教育出版社,1992.
[13]周光良,刘孝敏.粘弹性理论[M].合肥:中国科学技术大学出版社,1996.
[14]克拉盖尔斯基著,王一麟等译.摩擦摩损和润滑[M].北京:机械工业出版社,1985.
[15]管迪华,张艾谦,吴卫东.用模态方法分析轮胎印迹内摩擦力及不同表面垂直特性[J].清华大学学报(自然科学报),1999,29(39):98-101.
[16]彭旭东,谢友柏,郭孔辉.轮胎摩擦学的研究与发展[J].中国机械工程,1999,2(10):215-219.
[17]Noshi Miyashita,Tetsuji Kwawzura,Kazuyuki Kabe.Analutical model of μ-S curve usign generalized skewed-parabola[J].JSAE Review,2003,24:87-92.
[18]郭孔辉,等.汽车轮胎橡胶摩擦试验研究[J].机械工程学报,2004,10(40):176-181.
