作者简介：夏 (1982-),女,江苏南京人,硕士研究生.
作者单位：夏（南京工业大学,材料科学与工程学院,南京,210009）
张军（南京工业大学,材料科学与工程学院,南京,210009）
参考文献：
[1]冯圣玉,张洁,李美江,等.有机硅高分子及其应用[M].北京:化学工业出版社,2004.116～132.
[2]章基凯.硅橡胶[J].化学世界,1990,31(5):193～198.
[3]吴敏娟,周玲娟,江国栋,等.导热电子灌封硅橡胶的研究进展[J].有机硅材料,2006,20(2):81～85.
[4]潘大海,刘梅,孟岩,等.导热绝缘室温硫化硅橡胶的研制[J].橡胶工业,2004,51(9):534～536.
[5]Horikoshi J,Kimura T,Miyoshi K.RTV heat conductive silicone rubber
compositions[P].US:2006/0079634A1,2006.
[6]潘大海,刘梅.填料并用对双组分室温硫化导热硅橡胶性能的影响[J].有机硅材料,2005,19(5):15～17.
[7]潘大海,刘梅.刚玉粉对室温硫化导热硅橡胶性能的影响[J].有机硅材料,2004,18(6):9～12.
[8]Wang Q,Gao W,Xie Z M.Highly thermally conductive room-temperature-vulcanized silicone
rubber and silicone grease[J].Journal of Applied Polymer Science,2003,89(9):2397～2399.
[9]Deng H,Hackam R,Cherney E A.Role of the size of particles of alumina trihydrate filler
on the life of RTV silicone rubber coating[J].IEEE Transactions on Power
Delivery,1995,10(2):1012～1023.
[10]Siderakis K,Agoris D,Gubanski S.Influence of heat conductivity on the performance of
RTV SIR coatings with different fillers[J].Journal of Physics D:Applied
Physics,2005,38(19):3682～3689.
[11]谢泉,罗姣莲,干福熹.自然老化对导电硅橡胶电阻特性的影响[J].合成橡胶工业,1999,22(5):291～293.
[12]谢泉,罗姣莲,黄宏伟,等.填充粒子对复合型导电硅橡胶电阻温度特性的影响[J].功能高分子学报,1999,12(4):414～418.
[13]李周,潘慧铭.导电硅橡胶的制备与性能优化设计[J].有机硅材料,2005,19(4):4～6.
[14]李鹏,刘顺华.导电炭黑填充室温硫化硅橡胶的屏蔽性能[J].功能高分子学报,2005,18(2):227～231.
[15]李鹏,刘顺华,段玉平,等.导电型室温硫化硅橡胶的屏蔽性能及拉敏特性研究[J].有机硅材料,2005,19(2):9～13.
[16]刘顺华,李鹏杜,纪柱,等.炭黑填充复合型硅橡胶屏蔽性能及拉敏特性研究[J].大连理工大学学报,2006,46(2):207～211.
[17]Vilcakova J,Paligova M,Omastova M,et al."Switching effect" in pressure
deformation of silicone runner/polypyrrole composites[J].Synthetic Metals,2004,146(2):121～126.
[18]李剑锋,龚兴龙,张先舟,等.硅橡胶基磁流变弹性体的研制[J].功能材料,2006,37(6):1003～1006.
[19]乔冬平,王利.船用高性能硅橡胶腻子的研制[J].材料开发与应用,2005,20(4):12～14.
[20]李鹏,刘顺华.导电炭黑填充室温硫化硅橡胶的屏蔽性能[J].功能高分子学报,2005,18(2):227～231.
[21]李鹏,刘顺华,陈光钧.电磁波屏蔽橡胶的线性电阻特性研究[J].特种橡胶制品,2005,26(1):12～15.
[22]刘永海,段海平,段玉平.新型建筑用铸态硅橡胶/聚苯胺屏蔽复合材料的研究[J].铸造技术,2006,27(5):517～520
[23]Vern L H,Christopher F K.Curable silicone compositions for the protection of
polyurethane foam[P].EP:0167307,1985.
[24]许少波,饶华新,张子勇.硅橡胶/正硅酸乙酯杂化膜的制备及其富氧性能[J].应用化学,2006,23(6):617～621.
[25]Yoon I J,Shin J H,Paeng I R,et al.Potentiometric behavior of metalloporphyrin-based
ion-selective electrodes:Use of silicone rubber matrix for serum chloride
analysis[J].Analytica Chimica Acta,1998,367 (1 ～ 3):175～181.
[26]Yoon I J,Lee D K,Nam H,et al.Ion sensor using onecomponent room temperature vulcanized
silicone rubber matrices[J].Journal of Electroanalytical Chemistry,1999,464(2):135～142.
[27]Malinowska E,Oklejas V,Hower R W,et al.Enhanced electrochemical performance of
solid-state ion sensors based in silicone rubber membranes[J].Sensors and Actuators
B,1996,33(1～3):161～167.
[28]Poplawski M E,Brown R B,Rho K L,et al.One-component room temperature ulcanizing-type
silicone rubberbased sodium-selective membrane electrode[J].Analitica Chimica
Acta,1997,355(2～3):249～257.
[29]Chen G W,Yuan Q.Methanol synthesis from CO2 using a silicone rubber/eramic composite
membrane reactor[J].Separation and Purification Technology,2004,34 (1 ～ 3):227～237.
[30]R T S.New method for evaluation of kinetic parameters and mechanism of degradation
from pyrolysis-GC studies:Thermal degradation of polydimethysiloxanes[J].Journal of
Applied Polymer Science,1999,73(3):441～450.
[31]杨洪,申屠宝卿.硅橡胶的耐热稳定性[J].合成橡胶工业,2005,28(3):229～233.
[32]杨始燕,汪倩,彭文庆,等.加成型室温硫化硅橡胶热稳定性的研究[J].橡胶工业,1999,46(8):468～471.
[33]曲艳斌,方辉.耐热阻燃硅橡胶的研制[J].有机硅材料,2006,20(3):111～113.
[34]Bayly B P.One component room temperature vulcanizable (RTV) silicone sealant with
improved high temperature adhesion[P].US:5932650,1999.
[35]范召东,张鹏,成晓阳,等.耐350℃有机硅胶粘剂的研制[J].粘接,2005,26(4):11～13.
[36]王清正,谢择民,王金亭,等.硅氮化合物交联的缩合型双组分室温硫化硅橡胶的热稳定性[J].合成橡胶工业,1993,16(4):230～231.
[37]王清正,师彤,谢择民,等.硅氮化合物交联剂交联的室温硫化硅橡胶的热稳定性[J].高分子学报,1994,(5):573～577.
[38]贾丽,杨再文,刘华飞,等.改性Mg(OH)2对脱醇型RTV硅橡胶性能的影响[J].有机硅材料,2005,19(2):17～19.
[39]Winnan,Penarth.Foam coated with silicone rubber[P].EP:0529872A1,1993.
[40]李汉堂.聚硅氧烷阻燃剂[J].世界橡胶工业,2004,31(12):12～13,16.
[41]蔡登科,喻剑辉,文习山,等.RTVSR/SiO2电绝缘纳米复合材料的性能研究[J].中国电机工程学报,2004,24(4):162～167.
[42]陈石刚,许靖,许永现.冷缩电缆附件用液体注射硅橡胶的制备[J].有机硅材料,2005,19(6):20～22.
[43]Cherney E A,Gorur R S.RTV silicone rubber coating for outdoor insulators[J].IEEE
Transactions on Dielectrics and Electrical Insulation,1999,6(5):605～611.
[44]Cherney E A,Hackam R,Kim S H.Porcelain insulator maintenance with RTV silicone rubber
coatings[J].IEEE Transactions on Power Delivery,1991,6(3):1177～1181.
[45]Gary N R.High voltage insulators[P].EP:0123487,1984.
[46]曾凡辉,姜其斌,陈红梅.双组分室温硫化硅橡胶防污闪涂料的研制[J].绝缘材料,2005,(4):10～13.
[47]Deng H,Hackam R,Chernay E A.Factors influencing the electrical performance of RTV
silicone rubber coatings[C].Conference on Electrical Insulation and Dielectric Phenomena
(CEIDP),Annual Report[A].1994.669 ～674.
[48]Deng H,Hackam R.Electrical performance of RTV silicone rubber coating of different
thicknesses on porcelain[J].IEEE Transactions on Power Delivery,1997,12(2):857～866.
[49]Gorur R S,Mishra T J,M R R.Electrical performance of RTV silicone rubber
coatings[J].IEEE Transactions on Dielectrics and Electrical Insulation,1996,3 (2):299 ～306.
[50]Kim S H,Cherney E A,Hackam R.Suppression mechanism of leakage current on RTV coated
porcelain and silicone rubber insulators[J].IEEE Transactions on Power
Delivery,1991,6(4):1549～1556.
[51]Kim S H,Cherney E A,Hackam R.Hydrophobic behavior of insulators coated with RTV
silicone rubber[J].IEEE Transactions on Power Delivery,1992,27(3):610 ～622.
[52]Kim S H,Cherney E A,Hackam R,et al.Chemical changes at the surface of RTV silicone
rubber coatings on insulators during dry-band arcing[J].IEEE Transactions on Dielectrics
and Electrical Insulation,1994,1 (1):106 ～123.
[53]Waters M G J,Jagger R G,Winter R W.Effect of surface modified fillers on the water
absorption of a (RTV) silicone denture soft lining material[J].Journal of
Dentisity,1996,24(4):297～300.
[54]Waters M G J,Jagger R G,Winter R W.Water absorption of (RTV) silicone denture soft
lining material[J].Journal of Dentistry,1996,24(1～2):105～108.
[55]Kenichi K,Mario S,Christian P,et al.Room temperature crosslinking,one component
silicone rubber formulations with hydrophobic silicas[P].CA:2417459,2003.
[56]Zhang H P,Annich G M,Miskulin J,et al.Nitric oxide releasing silicone rubbers with
improved blood compatibility:preparation,characterization,and in vivo
evaluation[J].Biomaterials,2002,23(6):1485～1494.
[57]Haas H E,Kovacs F L.Oil resistant silicones[P].US:6413354B1,2002.
[58]Beers M D,Thompson J E.Auto-adhering one-component RTV silicone sealant composition
utilizing glycidoxyalkyl substituted alkoxy-oxime silane as an adhesion
promoter[P].US:4673750,1987.
[59]Beers M D,Thompson J E.Auto-adhering one-component RTV silicone sealant composition
utilizing an adhesion promoter[P].US:4735979,1988.
[60]Beer M D,Thompson J E.Oil resistant low modulus silicone sealant
composition[P].US:4514529,1985.
[61]Joseph D J.One-part room temperature vulcanizing compositions with improved oil
resistance and adhesion[P].WO:93/19130,1993.
|
