橡胶技术网

橡胶工业
CHINA RUBBER INDUSTRY
2003 Vol.50 No.10 P.619-624

橡胶技术网

轮胎磨损的影响因素

Effective factors on tire wear

彭旭东  郭孔辉  丁玉华  单国玲  侯汝成 

摘 要:轮胎胶料的磨损主要受轮胎工作条件、工作环境、轮胎结构和胶料性能等因素的影响.基于摩擦学原理,总结了汽车轮胎的磨损机理和主要磨损形式,分析了轮胎结构和胎面胶料的性能等因素对轮胎磨损的影响,认为轮胎结构的优化设计、胶料组分的优化组合和橡胶并用对改善轮胎耐磨性能和摩擦力学特性极其重要.
关键词:轮胎;磨损机理
分类号:TQ330.1+2;TQ336.1+1  文献标识码:B

文章编号:1000-890X(2003)10-0619-06

作者简介:彭旭东(1964-),男,湖南益阳人,石油大学教授,博士后,主要从事橡胶类材料摩擦学、轮胎力学和流体密封的教学与科研工作.
作者单位:彭旭东(石油大学,机电学院,山东,东营,257061) 
     郭孔辉(吉林大学,汽车动态模拟国家重点实验室,吉林,长春,130025) 
     丁玉华(三角轮胎股份有限公司,山东,威海,264200) 
     单国玲(三角轮胎股份有限公司,山东,威海,264200) 
     侯汝成(三角轮胎股份有限公司,山东,威海,264200) 

参考文献:

[1]彭旭东,谢友柏,郭孔辉.轮胎摩擦学的研究与发展[J].中国机械工程,1999(2):215-219.
[2]Schallamach A.Friction and abrasion of rubber[J].Wear,1958,1(5):384-417.
[3]Veith A G,Chirico V G.A quantitative study of the carbon black reinforcement system for tire tread compounds[J].Rubber Chemistry and Technology,1979,52(4):748-763.
[4]Veith A G.A review of important factors affecting treadwear[J].Rubber Chemistry and Technology,1992,65(3):601-658.
[5]Schallamach A.Recent advances in knowledge of rubber friction and tire wear[J].Rubber Chemistry and Technology,1968,41(1):209-244.
[6]Walters M H.Uneven wear of vehicles tires[J].Tire Science and Technology,1993,21(4):202-219.
[7]Xie Y B.On the systems engineering of tribo-systems[J].Chinese J. Mech.Eng.(English Ed.),1996(9):89-99.
[8]克拉盖尔斯基ИВ.摩擦、磨损与润滑手册(第二册)[M].汪一麟,沈继飞,汤胜常译.北京:机械工业出版社,1985.409.
[9]彭旭东,谢友柏,郭孔辉.汽车轮胎磨损机理的研究[J].润滑与密封,1999(6):50-52.
[10]Schallamach A. Abrasion pattern on rubber[J].Trans.Inst.Rubb.Ind.,1952(28):256-268.
[11]Muhr A H,Robert A D.Rubber abrasion and wear[J].Wear,1992,158:213-228.
[12]Zhang S W.State-of-the-art of polymer and wear[J].Wear,1992,158:213-228.
[13]Blythe R J.Treadwear and treadwear mechanisms[A].ACS Rubber Division Spring Meeting[C].Mexico:1989.230.
[14]庄继德.汽车轮胎学[M].北京:北京理工大学出版社,1996.
[15]Grosch K A.Abrasion of rubber and its relation to tire wear[J].Rubber Chemistry and Technology,1992,65(1):78-106.
[16]吴道兰.使用条件对轮胎磨耗的影响[J].橡胶工业,1995,42(11):693-698.
[17]张嗣伟.橡胶磨损原理[M].北京:石油工业出版社,1998.
[18]Grosch K A,Schallamach A.Relation between abrasion and strength of rubber[J].Rubber Chemistry and Technology,1966,39(2):287-305.
[19]彭旭东,谢友柏,郭孔辉.轮胎摩擦特性与胎面胶性能间关系的研究[J].润滑与密封,1998(4):12-15.
[20]Thavamani P,Bhowmick K B.Abrasion of NR and SBR vulcanizes at high temperatures[J].Plastics,Rubber and Composite's Processing and Applications,1993,20(4): 239-246.
[21]Veith A G.Tire treadwear--the joint influence of compound properties and environmental factors[J].Tire Science and Technology,1995,23(4):212-237.
[22]Medalia A I.Effects of carbon black on abrasion and treadwear[J].Kautschuk Gummi Kunststoffe,1994,47(5):364-368.
[23]Wilder C R,Haws J R,Cooper W T.Effects of carbon black types on treadwear of radial and bias tires at variable test severities[J].Rubber Chemistry and Technology,1981,54(2):427-438.
[24]Uchiyama Y.The effect of environment on the friction and wear of rubber[J].Wear,1986,110: 369-378.


收稿日期:2003年4月16日

出版日期:2003年10月25日

请看PDF全文